Brought to you by:   Farm Equipment  Precision Farming Dealer  Strip-Till Farmer
 

Vulcan Equipment ZoneMaster

The ZoneMaster is a strip-till tool designed to create optimal spring strips or to dress up fall-applied strips. The ZoneMaster clears residue, lightly conditions the soil, speeds up warm-up and dry-down for faster and more even germination. Using “vertical tillage,” it creates an optimal planting atmosphere. ZoneMaster can also be used to apply starter fertilizer or liquid fertilizer in the root zone. ZoneMaster provides the best in quality and value to serve the purpose of creating a better yield via pre-planting preparation and soil condition optimization. The ZoneMaster is field-tested and proven.

Click here for more information.

 

Copperhead Ag Products

Copperhead Ag Products prides themselves in offering profitable solutions to challenges facing the modern day farmer. Our field experienced engineers have developed several profit producing products for your operation. Planter operators can benefit from the use of our Furrow Cruiser(r) and Cruiser Xtreme spiked closing wheels, which eliminate sidewall compaction and promote even emergence of planted seeds. Gains of 4% yield per acre were seen on average last season. We also designed the Drill Cruiser and SFP Cruiser closing wheel for drill and air seeders. These products were developed over the last 4 years and have met with quick acceptance of those that drill beans and small grains.

Visit us online at www.copperheadag.com for videos and more information!

 

Montag’s Gen II

Montag’s Gen II offers a complete dual bin system with two separate 4.5-ton poly tanks, ISO scales for each tank, 1-18 rows, VRT per tank with on/off section control of up to 4 sections, complete with Montag Mfg. Rate controller. Designed to be more corrosion resistant by using stainless and composite materials with greater serviceability, easier to repair or replace parts, and easier to clean out at the end of the year. With the ability to add rows and configure drives you can now easily invest in a metering platform that can be adapted to your operation as it changes and evolves for years to come.

Click here for more information.

 

Schlagel Rapid Till

Lightweight and low draft, the Rapid Till is perfect for applying fertilizer (dry, liquid, or anhydrous ammonia) in the fall or spring. Able to travel up to 10 m.p.h., this unit can cover large acreages in a short amount of time — and because of its low weight and draft, it can even be utilized by smaller tractors! Each unit is designed with row cleaners and gauge wheels. Row cleaners are adjustable for height and width, allowing you to decide how wide of an area is swept clean. When adjusting for width, the front remains in the same relationship to the front coulter, ensuring a clean strip. Quality construction, ease of maintenance and excellent performance make the Rapid Till a smart choice for a wide range of farmers.

Click here for more information.

 

StripTillForYou.Com

Strip Till for You is a farmer-owned business where we use what we sell. We have been working with Dawn Equipment and Montag Mfg since 2008 and have since expanded to include Yetter Mfg., Niffty Ag and Twin Diamond Industries for strip-till units along with Harvest International, Moore-built and B&D Metal works for pull-type and 3-point toolbars. Whether we build a turnkey machine or direct ship items from factory to your farm, we are your one stop shop for the right machine for your needs. New and used items on hand.

Click here for more information or call 701-899-1439.

 

Nutri-Pro® by Great Plains combines Vertical Strip-Tillage with Nutrient Application

Great Plains’ innovative Nutri-Pro® Precision models are designed to apply liquid fertilizer while simultaneously removing residue and vertically strip-tilling the planting zone, promoting fast, even emergence in the newly cleaned, warmed and fertile seedbed. They allow the producer to pre-apply liquid fertilizer in the spring — just prior to planting — replacing traditional methods of applying nutrients in the fall to eliminate winter Nitrogen losses. Patent-pending Quik-Tach™ Coulters allow the three-coulter Nutri-Pro Precision models to be easily converted from pre-apply to sidedress so fertilizer can be applied after the plants have emerged, ensuring nutrients reach the plant directly for maximum benefit and reduced waste.

Click here for more information.

 

TruAg TerraForge Series Strip-Till Row Units

The TerraForge Series Strip-Till Row Unit creates an ideal and uniform seed bed while consistently delivering up to two fertilizer applications in a single pass. The robust and versatile design can be customized to meet any farmer’s needs. The parallel arm system accompanied with extension springs ensures constant ground contact in varying terrains while offering an auto resetting trip system to clear even the largest foreign obstruction. Pneumatic down force and large row cleaners remove trash, while turning slowly and not throwing trash into neighboring rows. Lower coulter assembly starts the berm building process by piercing & slicing the ground surface and creating a fracture point for the trailing coulter or shank. Rack & pinion shank design makes in-field depth changes quick and easy. Optional blow-out preventers prevent soil from boiling outside the reach of closing system, keeping soil in and trash out resulting in a uniform, well-defined strip. The closing system forms, seals, & builds an ideal berm by pulling the loose soil back into a consistent built berm. Optional berm conditioning systems finish the process by forming, shaping and sizing the berm into the perfect seed bed.

Click here for more information.

 

Yetter 2984 Strip Freshener

Yetter’s 2984 Strip Freshener utilizes a three-blade design followed with the rolling basket to condition existing strips to warm the planting zone or create spring strips. The parallel linkage arms allow the freshener to follow field contours at operating speeds of 6-10 mph and 2-4 inches deep. The Strip Freshener includes a universal mounting bracket to fit 4-by-4-inch, 5-by-7-inch, 6-by-6-inch, and 7-by-7-inch toolbars. Optional fertilizer kit for liquid or dry application is available.

Click here for more information.

 

J. Assy Agricultural VISUM™ Wireless Flow Monitor System for Strip-Till

The VISUM™ system provides you the peace of mind knowing that your dry-granular fertilizer is being applied at each row on your strip-till toolbar. When a row is blocked at the opener or if a meter is blocked, the in-cab monitor alerts the operator.

The VISUM flow-blockage monitor system is 100% wireless technology, and is fast and easy to install, with no modifications required to existing equipment. No cables to install. The sensors are weatherproof and maintenance free. Each sensor has a wear-resistant stainless steel liner. Click here to see our product video.

Click here for more information.

 

Hiniker 6000ST Strip-Till System

Hiniker 6000ST strip-till system includes a complete suite of strip-till components, allowing farmers to purchase anything from individual row units to complete systems including dry or liquid fertilizer carts.

Hiniker row units are designed for heavy residue conditions and include an 18-inch cutting coulter surrounded by a pair of 16-inch gauge wheels, a pair of 14-inch row cleaners and a high-tensile steel shank with a chrome carbide point and a stainless steel fertilizer tube. A pair of 18-inch berming discs cimplete the package. Soil is fractured to a 5-9 inch depth leaving a excellent bermed seedbed.

Click here for more information.